Brown virgin fused aluminum oxide is a very versatile blasting abrasive used in a wide variety of applications. It has high hardness properties and can be used for multiple purposes. It can also be recycled.
Brown Virgin Fused Aluminum Oxide
Brown fused aluminum oxide is angular in shape, giving it the ability to aggressively cut away at the surface leaving a profiled matte finish. This aggressive abrasive is to be used only in air blasting applications with boron carbide nozzles.
Please note that because it is an insulating material, brown aluminum oxide should not be used before brazing as it inhibits capillary attraction. It should not be used before plating unless a chemical cleaning bath is employed because it will not carry a current and can cause plating voids.
Brown aluminum oxide is high-quality fused virgin material produced to conform to all major industrial and governmental standards. These include:
- CID A-A-59316
- ANSI B74.12-2001
- GE Aircraft Engine Group D50TF5
- Most Pratt and Whitney Aircraft Specifications
Brown Aluminum Oxide
Applications:
- General air blasting
- Powder coating removal
- Profiling, rust/scale removal
- Surface preparation
Sizes:
16 to 220 mesh
Hardness:
Mohs – 9.0
Packaging:
- 50 lb. bags
- 400 lb. fiber drum
- We also accommodate special packaging requirements.
Let’s Get Started.
We’ll start working with you immediately to meet all of your cut wire shot, blasting media and blasting equipment needs.